Indítsa el a Ingyenes ingyenes alkalmazásunkat!

Élvezze az alkalmazás exkluzív ajánlatait.

Indítsa el az alkalmazást
HAKRC Storm32 Alloy 3 tengelyes kefe nélküli Gimbal FPV tartozék
HAKRC Storm32 Alloy 3 tengelyes kefe nélküli Gimbal FPV tartozék
HAKRC Storm32 Alloy 3 tengelyes kefe nélküli Gimbal FPV tartozék
HAKRC Storm32 Alloy 3 tengelyes kefe nélküli Gimbal FPV tartozék
HAKRC Storm32 Alloy 3 tengelyes kefe nélküli Gimbal FPV tartozék
HAKRC Storm32 Alloy 3 tengelyes kefe nélküli Gimbal FPV tartozék
1/1

HAKRC Storm32 Alloy 3 tengelyes kefe nélküli Gimbal FPV tartozék - Fekete

Lásd a fordítást
20506.64Ft
66.58
92 Vélemények

Kupon:

promóció:

Támogassa a COD kifizetést

Raktár és díj

választ
CN-099:Szállítás között: Sep 26 - Sep 28

Termék opciók

választ
Fekete
Látogasson el az áruházba

Vélemények (92)

Richard S.
Feb 25,2018
I was looking for a solid 3 axis gimbal setup also easy to be configured. This gimbal fullfiled all my expectations. I have written an instructable about how to build a handheld gimbal using the Hakrc Storm32 gimbal, I hope you find it usefull! Excelent gimbal, solid setup. I used this product to build a handheld gimbal. Furthers details can be found here http://rsflightronics.com/diy-3-axis-handheld-gimbal-for-action-cam
Mutass többet

Leírás

HAKRC Storm32 3 tengelyes kefe nélküli Gimbal Könnyű Gopro3 Gopro4 FPV szerelvények

Típus: FPV szerelvények
Márka: HAKRC
Termék megnevezése: Storm32 3 tengelyes kefe nélküli gumi
Storm32 fórum verzió: V 1.32
Kompatibilis: Gopro 3 Gopro 4
Fekete szín
Bemeneti feszültség: 3 - 4S (11,1 - 16,8 V)
Csomag: 1 x 3 tengelyes kefe nélküli kardán

Leírás

Tábornok

Márka: HAKRC
FPV berendezések: kardáncsukiótestet
Kamera bilincsek: Kefe nélküli kardáncsavarok

Méretek és tömeg

A csomag súlya: 0,3060 kg
A csomag mérete (H x Sz x M): 13,00 x 13,00 x 13,00 cm / 5,12 x 5,12 x 5,12 hüvelyk

Csomag tartalma

Csomag tartalma: 1 x 3 tengelyes kefe nélküli gimbal

Ajánlott termékek

Szponzorált termékek

Új tag bónusz: $ 50 kupon
20506.64Ft

HAKRC Storm32 Alloy 3 tengelyes kefe nélküli Gimbal FPV tartozék

Szín

Mennyiség - +
részletekben: választ
loading...
loading...
megszünteti
loading...
loading...
loading...

Vélemények

4.83 *****
  • 80
  • 10
  • 1
  • 0
  • 1
  • Minden ( 92 )
  • ( 46 )
  • ( 22 )
Richard S.
Feb 25,2018
I was looking for a solid 3 axis gimbal setup also easy to be configured. This gimbal fullfiled all my expectations. I have written an instructable about how to build a handheld gimbal using the Hakrc Storm32 gimbal, I hope you find it usefull! Excelent gimbal, solid setup. I used this product to build a handheld gimbal. Furthers details can be found here http://rsflightronics.com/diy-3-axis-handheld-gimbal-for-action-cam
Javaslat:
It might require a little bit of hardwar handling experience, but there is a lot information out there ;)
GregoryH
Sep 06,2018
I bought this gimbal to use it with Phantom 2, it comes to me well packed with all needed to install stuff like screws cables etc., there is many possibilities to configure with external interfaces. I configured pitch control port using S-Bus and it works well, no need to configure anything in NAZA, just connect to radio receiver and choose correct channel. Only strap holding camera was to long and needed to cut it.I can highly recommend this product!
wazoo
Nov 08,2017
low price for a great "basic" gimbal probably more priced are best but what is the difference ?? I do not know for my S500 DIY quad it will be great. HAKRC is based on Storm32 hardware and it has a powerfull software to configure
Javaslat:
camera fixation strap is for GoPro (as description) as you can see on video/pictures, it does not fit on a Yi Sports camera but I knew that, just buy a stantard tripod screw because Yi has that hole on the bottom like photo/video cameras. the other con is that if you if you exceed the angle position limits the gimbal shakes and stops. normally on a slowfly you do not exceed this limits.
Manos Pappas
Mar 03,2016
- Storm32 BGC board, latest version 1.31 with two IMUs and all connectors. - Small motors, less power consumption. - Mounts, screws, washers and gimbal servo cables included. - Calibrated and working out of the box (firmware v0.70).
Javaslat:
None
tovangib
Jun 02,2016
very cheap but well built, it just needs a firmware update and some tweak on calibration to be perfect, please note that it comes comprehensive of everything (board, motors, etc...). It has a jst plug, I used a lipo battery to build a handheld gimbal
Javaslat:
none
Nicocuts
Mar 07,2017
i bought this gimbal for my CX 20. It works reaaaally well with my gopro, it's very smooth and strong. easy to install. I can move 2 (of 3) axis from the controller of the drone. Very cool!
Javaslat:
the gimbal weights a little too much, comparing to the other, and it's a bit difficoult to configure and upgrade the firmware
valysvj
Aug 03,2016
I just received my HAKRC Storm32 3 Axis Brushless Gimbal Lightweight Gopro3 Gopro4 FPV Fittings and it is ok and I just wait to fix on my CX-20
Javaslat:
-
S. E. G
Aug 09,2016
The HAKRC Storm32 3 Axis Brushless Gimbal is very light and the price is good. It is easy to use and works with drone CX-20 or XK380
Javaslat:
Initial time from the gimbal is to long. Get it from http://www.gearbest.com/fpv-system/pp_244970.html
Peter chabowski
May 23,2016
I am totally satisfied with the gimbal. For the price there is probably no better 3 axis Gimbal. I use it with a SJ 5000 Plus Cam under my S500 frame. Would I buy again.
Javaslat:
There is so far nothing negative to report.
dr.knyazev
Jul 29,2016
It's cheap compared to gimbals from other stores or ebay. I have assembled the handheld steadicam for my Xiaomi Yi, it works well but still needs a lot of recalibration
Javaslat:
None
Mutass többet
Mutass többet
Mutass többet